For use with 15ft long canopies that have LOW PITCH angles for roof.   This kit includes 6 end brackets and 6 middle brackets to use with 1 inch conduit (not included).
This allows you to put up a wall tent without having a center pole in the way of the door. All-metal brackets are zinc coated and have hand cinch eye-bolts to tighten it all together.
The eye-bolts make for a super-solid structure that has NO play at all.

When you use a frame of these brackets, you only need to use 2 ropes and the side stakes to hold it down, and it is one seriously strong structure. If it isn't windy, I don't even bother with the ropes.

This kit has 12 brackets and does NOT include the pipes.  This LOW ANGLE set is NOT for our wall tents.

To use this on a15ft wall tent, you will need:

22 5ft pieces of 1 inch conduit, and 3 pieces slightly smaller.  The 3 are the horizontals in one bay, as our tent is a bit under 15ft long inside.

Keep in mind that 1 inch conduit is slightly larger than one inch in diameter!  Do not use the 3/4 inch which is about 1 inch outside measurement.